Custom lithium battery packs for device makers · Made in Shenzhen, shipped worldwide

sale1@jetray.cnEngineer reply within 24 h
01 / 07

Medical Device Batteries

Custom lithium battery packs for portable medical devices.

Explore medical device
Not sure where your product fits? An engineer replies within 24 hours.All industries Send your spec
01 / 05

Replacement Battery Packs

Custom lithium replacement packs for lead-acid batteries and light EVs.

Explore replacement
Not sure which product fits? An engineer replies within 24 hours.All products Send your spec
10450 1.5V 2000mAh Li-ion Battery
Cylindrical Cells

10450 1.5V 2000mAh Li-ion Battery

Li-ion (LiCoO2)OEM / ODM

This 10450 cylindrical cell (SH14500) is a Li-ion (LiCoO2) rechargeable cell rated at 1.5V 2000mAh, supplied by Jetray Battery. We supply it as single cells for your production line or assemble it into finished packs with BMS, wiring and housing. Typical uses include custom battery pack assembly, flashlights and portable lighting, power tools and small appliances.

  • Nominal voltage1.5V
  • Capacity2Ah
  • Energy3Wh
  • Weight19± 0.5g
  • Fully customizableVoltage, capacity, BMS, housing
  • Documents readyDatasheet, MSDS, UN38.3
  • 24-hour replyDirect from our engineers
Specifications

Technical data

Standard model values. Every parameter below can be adjusted for your project.

Nominal Voltage1.5V
Capacity2000mAh
Battery ModelSH14500
ChemistryLi-ion (LiCoO2)
Energy4
Charging MethodType-C USB Charging Cable
Standard Discharge Current80mA
Cycle Life500 cycles / 500+ cycles (80% DOD)
Dimensions14 × 50mm ± 0.5mm
Weight19 ± 0.5g
Operating Temperature-20℃ ± 60℃
CertificationUL, IEC, CE, UN38.3, etc.
USB Input Parameter5V / 500mA ± 30mA
Need different specs?

Send your voltage, capacity, current and size limits. We build packs to your drawing.

Applications

Where it is used

Custom battery pack assembly
Flashlights and portable lighting
Power tools and small appliances
IoT, smart home and handheld devices
Customization & BMS

Built around your equipment

Voltage, capacity, size, BMS and communication can all be changed for OEM / ODM projects. Start from this model or from your own drawing.

FAQ & safety

Common questions

We offer Li-ion (NCM / NCA), LiFePO4 and LTO cells, chosen to match your project needs.

Yes. We provide structural design so the pack fits your housing, connector and mounting points.

Overcharge, over-discharge, overcurrent, short-circuit and temperature protection, SOC / SOH display and communication protocols such as CAN and RS485.

Yes. Charging rates from 0.5C to 2C are possible, depending on the cell specification.

Typically 12–36 months, depending on the project agreement.

Keep them at 50–60% state of charge in a dry, ventilated place between −10 °C and 35 °C.

Safe handling

Heat and damage

Never heat, disassemble or modify the battery, or dispose of it in a fire. Do not pierce, hit, step on or drop it.

If fluid leaks

Do not touch it with bare hands. Rinse eyes, mouth or skin with clean water, see a doctor if needed and contact Jetray after-sales.

Keep it dry

Do not get the battery wet.

Storage conditions

Do not use or store the battery in direct sunlight, high heat or humidity, a hot car, or near heat sources.

OEM & custom packs

Ready to power your next project?

Tell us your voltage, capacity, size and application. Our engineers reply within 24 hours with a design proposal and quotation.

WhatsApp
Scroll to Top