Custom LiFePO4 House Batteries for RVs, Trailers and Vans
An RV lithium battery is the house battery that powers lights, pumps, fridge and inverter when the vehicle is off-grid. Jetray builds custom 12 V and 24 V LiFePO4 packs for RV, trailer and van builders and dealers, to your tray, charger and monitor.

Recommended products
Packs and cells we supply for this application. Every model can be customized — tap + to add models to your inquiry list, then send one request for all of them.
Try removing a filter — or tell us your spec and we will build it for you.
Size the house battery

- List each load and its hours per day, in watt-hours.
- Add the inverter loss if you run AC loads.
- Decide how many days you stay without charging.
- Divide by 12.8 V (a 12 V LiFePO4 pack) to get amp-hours, and add margin.
Example: 1,500 Wh per day for two days is 3,000 Wh. A 12.8 V pack needs about 235 Ah, so a 12 V 300 Ah build gives margin. This is an example only. We calculate from your loads.
12 V or 24 V
Parallel packs add capacity. Series connection raises voltage. Tell us your planned layout, so the BMS and communication suit it.

12 V (12.8 V LiFePO4)
- Typical use
- Most RVs, trailers and vans

24 V
- Typical use
- Larger RVs and high-power inverter systems

48 V
- Typical use
- Large conversions; send the system design
Charging and the RV electrical system
Lithium needs a charger and alternator setup that suits LiFePO4. Check these points:
We supply a matching charger. Charger and communication →
- 01Shore charger set for LiFePO4 charge voltage.
- 02Alternator or DC-DC charger limit the current to the pack's rating.
- 03Solar controller set for lithium.
- 04Cold weather do not charge below freezing without heating. Tell us your range, and we set the BMS limits.
Build and BMS

- BMS protection against overcharge, over-discharge, over-current, short circuit and temperature. BMS design →
- Communication Bluetooth, CAN, UART and RS485, set up to your requirement, so an app or monitor reads state of charge.
- Case plastic or sheet metal, IP65 as our usual level and other levels on request. The size can be matched to standard battery tray shapes, including Group 24, 27 and 31. Enclosure design →
- Self-heating built-in heating for charging in cold weather.
- Brand your label and packaging. OEM, ODM and private label →
Documents, order and delivery

UN38.3, IEC 62133 and MSDS documents are available, with transport and certification reports for the shipment. Other standards depend on your market. Custom battery pack samples are charged. Custom packs usually take one to two months, and items in stock ship without waiting. We supply builders, dealers and distributors worldwide. Cost and MOQ →
Mistakes to avoid with RV house batteries
Sizing from the label of appliances
TAP TO SEE WHYIgnoring the inverter
TAP TO SEE WHYCharging from the alternator without limits
TAP TO SEE WHYCold nights
TAP TO SEE WHYWrong space
TAP TO SEE WHYOptions you can set
Mark what you want to discuss. Your picks go into the quote form below.
From first message to delivery
Send the RV or van type, daily loads, inverter and battery box size.
We size the battery, propose the BMS and charging, and quote.
We build a charged sample, and you test it in a vehicle.
We adjust settings or the case from your notes.
Batch production, final test and worldwide shipping.
Frequently asked questions
Add up daily watt-hours, multiply by the days off-grid, divide by 12.8 V and add margin.
Yes, if the charger, alternator and solar settings suit lithium. Send your system details.
Yes, within the limit set for the pack. Tell us the layout.
Bluetooth can be set up to your requirement.
Yes. We support private label, including label and packaging.
Yes. We work with RV builders, installers and distributors.
Building RVs or vans?
Send the daily load and tray size. We reply within 24 hours.
Your rv, trailer and van battery packs
Values from the tools above are already here. Add what you know and send.
Your message to an engineer
Fill what you know. Blank lines are fine.Goes straight to our sales engineers, the same as the quote form. Need to attach a drawing? Use the quote form or email it.
Building RVs or vans? Send the daily load and tray size.
Request a Quote→



























































