
Custom Battery Packs for Wearable Devices
A wearable battery must be tiny, light and safe against the skin, and it must last through a day on a small charge. Jetray builds small custom LiPo packs and supplies coin cells for smart bands, rings, earbuds and health trackers.
Recommended products
Packs and cells we supply for this application. Every model can be customized — tap + to add models to your inquiry list, then send one request for all of them.
Try removing a filter — or tell us your spec and we will build it for you.
Design limits
Coin cell, LiPo or another cell

Custom-shape and ultra-thin pouch cells can be made. We confirm the size and layout once we have your drawing. Cell selection →
- Coin (button) cells suit small, low-power devices that run for a long time on one cell. Coin cells start at 4,000 pieces. Primary brands include Panasonic, Maxell, FDK and Seiko.
- LiPo pouch cells suit slim, flat devices that recharge. We select a cell that fits the space and add a small protection board.
- Small cylindrical Li-ion cells suit larger bands and headsets.
Protection and charging

The protection board guards against overcharge, over-discharge, over-current and short circuit. A temperature check is added when the design needs it. We supply a matching charger. Where the device needs data, CAN, UART, RS485 and Bluetooth can be set up to your requirement. BMS design →
Samples and documents

You send the drawing, we build samples, and you test them in the device. Custom battery pack samples are charged. UN38.3, IEC 62133 and MSDS documents are available, with transport and certification reports for the shipment. Other standards, such as skin-contact rules, depend on your market. Custom packs usually take one to two months. Prototyping and samples →
Mistakes to avoid with wearable batteries
Fixing the housing before the battery
A wearable has almost no spare room. Settle the battery space first.
Ignoring peak current
Radios and displays draw short bursts. Cells must supply them without a voltage drop.
Heat on skin
Keep heat low through cell choice, layout and charge current.
Charging method last
Pogo pins, wireless or USB each change the board. Decide early.
Skipping real-device testing
A sample in the actual device shows heat and run time.
Options you can set
Mark what you want to discuss. Your picks go into the quote form below.
From first message to delivery
STEP 1Send the device type, battery space, run-time target and charging method.
STEP 2We propose the cell, protection and shape, and quote.
STEP 3We build a charged sample, and you test it in the device.
STEP 4We adjust size, contacts or protection from your notes.
STEP 5Batch production, final test and shipment with the documents you need.
Frequently asked questions
Small LiPo pouch cells are common. Some simple devices use coin cells.
Send the thickness limit and the case drawing. We confirm what cell and layout fit.
The pack has protection and sits sealed in the device. Tell us the use and the target market.
Coin cells start at 4,000 pieces.
UN38.3, IEC 62133 and MSDS. Tell us the model and we confirm which documents cover it.
Yes. We supply primary coin and button cells as well as rechargeable packs.
MOQ depends on the product. Send your quantity and we confirm.
Designing a wearable?
Send the size limit and drawing. We reply within 24 hours.
Your wearable device battery packs
Values from the tools above are already here. Add what you know and send.
Your message to an engineer
Fill what you know. Blank lines are fine.Goes straight to our sales engineers, the same as the quote form. Need to attach a drawing? Use the quote form or email it.
Designing a wearable? Send the size limit and drawing.
Request a Quote→





































































