Custom lithium battery packs for device makers · Made in Shenzhen, shipped worldwide

sale1@jetray.cnEngineer reply within 24 h
01 / 07

Medical Device Batteries

Custom lithium battery packs for portable medical devices.

Explore medical device
Not sure where your product fits? An engineer replies within 24 hours.All industries Send your spec
01 / 05

Replacement Battery Packs

Custom lithium replacement packs for lead-acid batteries and light EVs.

Explore replacement
Not sure which product fits? An engineer replies within 24 hours.All products Send your spec
Custom battery pack prototypes on a test bench at Jetray
Custom Solutions

Prototyping and Small-Batch Trial for Custom Battery Packs

A prototype lets you test the pack in your own device before you commit to a batch. Give us a clear specification, and we build samples, test them and adjust until they meet it.

Engineer replyWithin 24 hours
Before you request samples

A clear spec saves a round of samples

Type your own values, or fill the sheet with an example to see what we mean. Then copy it into your request.

Sample specification · 0 of 8
01
02
03
04
05
06
07
08
Your sheet0 / 8 rows

The example values are examples only. If you cannot fill every row, send what you know.

Ready to send?

Paste the sheet into your message. Request samples

Products

Examples of packs we build

Standard models we have already built and tested. Use them as a starting point — tap + to add models to your inquiry list and tell us what to change.

View all products
40 products
At the sample stage

Six steps from spec to a working sample

Jetray engineer reviewing a sample specification with a customer
STEP 01

Confirm the specification

We confirm the specification with you before anything is built.

Cells and protection boards selected for a battery prototype
STEP 02

Select cells and protection

We select the cells and protection board and prepare the design.

Cell selection
Technician assembling battery pack samples
STEP 03

Build the samples

We build the samples to the drawing or size limit.

Battery sample test report printed beside a test station
STEP 04

Test and report

We test them and send a report with the samples.

Customer testing a battery pack sample inside their equipment
STEP 05

You test in your device

You test the samples in your device and send feedback.

Engineer adjusting a battery pack sample after customer feedback
STEP 06

Adjust and rebuild

We adjust and rebuild if needed.

What we test on samples

Every sample is checked before it ships

Hover a test to see it on the bench.

Measuring battery sample capacity and internal resistance
TEST 01

Voltage, capacity and internal resistance

Battery sample on a charge and discharge tester
TEST 02

Charge and discharge at your working current

Protection function test on a battery sample
TEST 03

Protection: overcharge, over-discharge, over-current, short circuit

Battery sample during a temperature test
TEST 04

Temperature behavior

Checking a battery sample connector and fit
TEST 05

Fit and connector check

Document support:UN38.3IEC 62133MSDSTell us the model so we can confirm which documents cover it.
From samples to production

The approved sample becomes the reference

After you approve a sample, we freeze the specification and move to batch production.

You approve a sample

After your own testing.

We freeze the specification

No changes without your approval.

Reference for every batch

Used for incoming checks and final testing.

Trial batch

Want a trial batch first?

Tell us the quantity. Custom battery packs usually take one to two months from start to delivery.

Development process

Energy storageA few unitsCost and MOQ
Coin cells4,000 pcsCost and MOQ
Other productsAsk usSend your quantity
FAQ

Frequently asked questions

Your application, voltage, capacity, peak current, size limit, interface and quantity. A drawing or a photo of the compartment helps.

Custom packs usually take one to two months. Items we hold in stock ship without waiting.

For energy storage products, yes. For other products, send your target quantity and we tell you what is possible.

Yes, we test them and tell you the results.

Yes. We adjust it from your test results and rebuild.

Battery prototypes being tested at Jetray

Ready for a prototype?

Send your specification and get a reply within 24 hours.

Scroll to Top