Custom lithium battery packs for device makers · Made in Shenzhen, shipped worldwide

sale1@jetray.cnEngineer reply within 24 h
01 / 07

Medical Device Batteries

Custom lithium battery packs for portable medical devices.

Explore medical device
Not sure where your product fits? An engineer replies within 24 hours.All industries Send your spec
01 / 05

Replacement Battery Packs

Custom lithium replacement packs for lead-acid batteries and light EVs.

Explore replacement
Not sure which product fits? An engineer replies within 24 hours.All products Send your spec
Glucose Meter Battery Packs

Battery Packs for Glucose Meter Makers

A glucose meter battery must be small, steady and safe, and it must last through long standby. Jetray supplies coin cells and builds small custom lithium packs for glucose meters and other handheld diagnostic devices, for device makers.

Cell typeSize and shapeProtection
Small lithium battery pack beside a handheld glucose meter
Start with what you knowReply in 24 h
Made in ShenzhenShipped worldwide
UN38.3 · IEC 62133 · MSDSDocuments available
Panasonic · Samsung · LG · Molicel · EVECell brands we can offer
Samples firstBuilt and tested before the batch
OEM, ODM, private labelWe also supply distributors
Reply within 24 hoursSend your spec any time
Products

Recommended products

Packs and cells we supply for this application. Every model can be customized — tap + to add models to your inquiry list, then send one request for all of them.

View all products
44 products
Two ways to power

Two ways to power a glucose meter

Coin cells start at 4,000 pieces. Primary cell brands we can offer include Panasonic, Maxell, FDK and Seiko. Rechargeable options include Panasonic, Samsung, LG, Molicel and EVE cells. Cell selection

OptionHow it worksBest for
Coin (button) cellA primary lithium cell, replaced by the userSlim meters with long standby and low current
Small rechargeable packA Li-ion or LiPo cell with a protection boardMeters with a screen, backlight or wireless link
What the device

What the device needs from the battery

Glucose meter battery pack: what the device needs from the battery

Send the meter's current draw in test and in standby, and we size the cell for it.

  • Steady voltage during a test, so readings stay stable.
  • Low standby drain, so the meter is ready weeks later.
  • A small, flat shape that fits the case.
  • Safety against short circuit and overheating, for rechargeable packs.
  • Clear low-battery warning at the right voltage.
Work out

Work out the capacity

We do this calculation from your numbers. If you have no numbers yet, send the meter model or the old battery, and we measure from there.

  • 01Find the average standby current and the current during a test.
  • 02Estimate tests per day and the days between battery changes or charges.
  • 03Add margin for cold weather and ageing.
What we can set

What we can set

  • 01Protection and charging a protection board for overcharge, over-discharge, over-current and short circuit, with a matching charger. BMS design
  • 02Communication for rechargeable packs with a data link, CAN, UART, RS485 and Bluetooth can be set up to your requirement.
  • 03Connector and leads wire length, plug type and polarity matched to your board.
  • 04Label and packaging your name and model number. OEM, ODM and private label
Documents

Documents and delivery

UN38.3, IEC 62133 and MSDS documents are available, with transport and certification reports for the shipment.

Other standards depend on your device and market. Tell us at the start. Custom packs usually take one to two months, and items in stock ship without waiting. Custom battery pack samples are charged. Quality and certification

Glucose meter battery pack: documents and delivery
Before you order

Mistakes to avoid when choosing a glucose meter battery

01

Sizing for the test count only

TAP TO SEE WHY
Why it mattersStandby draw over weeks can use more charge than the tests. Measure both.
02

Skipping low-battery behavior

TAP TO SEE WHY
Why it mattersDecide what the meter shows and does when the charge is low, so a result is never lost mid-test.
03

Choosing a rechargeable pack when a coin cell would do

TAP TO SEE WHY
Why it mattersIf the meter is used rarely, a primary cell can be simpler. We help compare.
04

Forgetting the charging port

TAP TO SEE WHY
Why it mattersA USB port needs protection and the right charge limit for the cell.
05

Late sample testing

TAP TO SEE WHY
Why it mattersTest a sample in the real housing, since a small case limits cell size and heat.
Options

Options you can set

Mark what you want to discuss. Your picks go into the quote form below.

0 selected to discuss
Process

From first message to delivery

01

Send the meter size, battery space, tests per day and charging method.

02

We propose the cell type and protection, and quote.

03

We build a charged sample, and you test it in the meter.

04

We adjust size, contacts or protection from your notes.

05

Batch production, final test and shipment with the documents you need.

FAQ

Frequently asked questions

Many use a coin cell, and some use a small rechargeable lithium pack. The meter's design decides.

Yes. Coin cells start at 4,000 pieces.

Yes. Send the size limit, voltage, current draw and the charging method you want.

We work with device makers and distributors. For a replacement battery, contact the maker of your meter.

UN38.3, IEC 62133 and MSDS. Tell us the model and we confirm which documents cover it.

Yes. We supply both. Tell us the usage and we help choose.

Yes. Send a drawing or photos with a ruler, and we shape the pack to the space.

Yes. Private label is supported.

Get a quote

Making a glucose meter?

Send the size limit, voltage and current draw. We reply within 24 hours.

Your requirement

Your glucose meter battery packs

Values from the tools above are already here. Add what you know and send.

Project
Options to discuss
Where should we reply?
0%

Your message to an engineer

Fill what you know. Blank lines are fine.
Email instead

Goes straight to our sales engineers, the same as the quote form. Need to attach a drawing? Use the quote form or email it.

Scroll to Top