18500 1900mAh Panasonic NCR18500A rechargeable lithium-ion battery cell
- 3.6V
- 2040mAh
- Li-ion
Custom lithium battery packs for device makers · Made in Shenzhen, shipped worldwide
Custom lithium battery packs for portable medical devices.
Explore medical device →
Medical DeviceCustom lithium battery packs for AGVs, AMRs and service robots.
Explore robotics and agv →
Robotics and AGVCustom lithium battery packs for forklifts, power tools, signal towers and test equipment.
Explore industrial equipment →
Industrial EquipmentCustom LiFePO4 battery packs for backup power, telecom backup, UPS and off-grid storage.
Explore energy storage and ups →
Energy Storage and UPSCustom lithium battery packs for e-bikes, motorcycles, golf carts and RVs.
Explore light mobility →
Light MobilityCustom lithium battery packs for security cameras, sensors, trackers and wearables.
Explore security and iot →
Security and IoTCustom lithium battery packs for heated apparel, drones, audio, lighting and small appliances.
Explore consumer and portable →
Consumer and Portable
Custom solutionsFrom your spec to a tested batchCells, BMS, case, charger and label, built around your device.See how we work →
Development ProcessFive stages from your brief to batch delivery→
BMS DesignProtection, balancing and data to your device→
Cell Selection & SourcingLi-ion, LiFePO4 or LiPo from leading brands→
Prototyping & SamplesCharged samples you test before the batch→
OEM / ODMYour spec or our design, under your brand→
Cost & MOQWhat drives price and minimum order→Custom lithium replacement packs for lead-acid batteries and light EVs.
Explore replacement →
ReplacementCylindrical and polymer lithium cells from Panasonic, Samsung, LG, Molicel and EVE for pack builders and device makers.
Explore lithium cells →
Lithium Cells
Primary LithiumSolar storage with inverter and lithium battery matched to each other.
Explore solar & energy storage →
Solar & Energy StorageCapacitors, switches and relays from Panasonic and Murata that go with battery products.
Explore electronic components →
Electronic Components
This Samsung 18650 cylindrical cell (INR18650-30Q) is a Li-ion rechargeable cell rated at 3.6V 3000mAh, supplied by Jetray Battery. We supply it as single cells for your production line or assemble it into finished packs with BMS, wiring and housing. Typical uses include custom battery pack assembly, flashlights and portable lighting, power tools and small appliances.
Standard model values. Every parameter below can be adjusted for your project.
Send your voltage, capacity, current and size limits. We build packs to your drawing.
Voltage, capacity, size, BMS and communication can all be changed for OEM / ODM projects. Start from this model or from your own drawing.
We offer Li-ion (NCM / NCA), LiFePO4 and LTO cells, chosen to match your project needs.
Yes. We provide structural design so the pack fits your housing, connector and mounting points.
Overcharge, over-discharge, overcurrent, short-circuit and temperature protection, SOC / SOH display and communication protocols such as CAN and RS485.
Yes. Charging rates from 0.5C to 2C are possible, depending on the cell specification.
Typically 12–36 months, depending on the project agreement.
Keep them at 50–60% state of charge in a dry, ventilated place between −10 °C and 35 °C.
Never heat, disassemble or modify the battery, or dispose of it in a fire. Do not pierce, hit, step on or drop it.
Do not touch it with bare hands. Rinse eyes, mouth or skin with clean water, see a doctor if needed and contact Jetray after-sales.
Do not get the battery wet.
Do not use or store the battery in direct sunlight, high heat or humidity, a hot car, or near heat sources.
Tell us your voltage, capacity, size and application. Our engineers reply within 24 hours with a design proposal and quotation.
Hi there 👋 Looking for a custom power solution?
Tell us what your device needs. Our engineers reply within 24 hours. This helps us quote faster:
Not sure about some of these? Send what you have. We will help fill in the rest.