Custom Battery Packs for Telecom Backup Power
A telecom backup battery keeps base stations, switches and cabinet equipment running during an outage. Jetray builds custom 48 V LiFePO4 packs for telecom equipment makers and integrators, in rack and cabinet formats.
Why operators move from lead-acid to lithium
Lithium costs more up front. Whether it pays back depends on site visits and the grid.
- 01Less weight and space in shelters and cabinets.
- 02No watering and fewer site visits.
- 03Many cycles where the grid is unstable.
- 04Remote monitoring of state of charge and faults.
What a backup pack must handle
Formats
For tower-side equipment, see signal tower packs .
- 01Rack-mount standard 19-inch rack modules; send the rack depth and height.
- 02Cabinet module sized to your cabinet shelf.
- 03Wall-mount for small sites.
- 0412 V and 24 V packs: for gateway, CCTV and IoT equipment.
How to size
Send these. We propose the cells and layout, and supply a matching charger. Cell selection Charger and communication
- 01Load in watts and its peak.
- 02Backup time during an outage.
- 03DC bus voltage and charger.
- 04Rack or cabinet space.
- 05Site temperature range.
Documents, order size and delivery
UN38.3, IEC 62133 and MSDS documents are available, with transport and certification reports for the shipment.
Other requirements, such as operator approval, depend on your customer. Energy storage products can be ordered in small quantities, even a few units. Custom packs usually take one to two months. Quality and certification
What to confirm before you quote a telecom backup job
Backup hours
TAP TO SEE WHYVoltage standard
TAP TO SEE WHYRack size
TAP TO SEE WHYRemote monitoring
TAP TO SEE WHYSite climate
TAP TO SEE WHYOptions you can set
Mark what you want to discuss. Your picks go into the quote form below.
From first message to delivery
Send the site load, voltage, rack space and monitoring protocol.
We propose the module layout, cells and BMS, and quote.
We build a charged sample, and you test it on a rectifier or at a site.
We adjust settings or the case from your test notes.
Batch production, final test and shipment with the documents you need.
Frequently asked questions
48 V is common. Smaller equipment uses 12 V or 24 V.
Yes. RS485, CAN and UART can be set up to your requirement. Send the protocol.
Often yes, with the right voltage, size and charger. Send the details.
Yes, for energy storage products. Send the quantity.
Yes. Send the rack drawing, and we shape the module to it.
We supply equipment makers, integrators and distributors. Send your project details and we confirm.
Planning telecom backup?
Send the DC voltage, load and backup time. We reply within 24 hours.
Your telecom backup battery packs
Values from the tools above are already here. Add what you know and send.
Your message to an engineer
Fill what you know. Blank lines are fine.Goes straight to our sales engineers, the same as the quote form. Need to attach a drawing? Use the quote form or email it.
Planning telecom backup? Send the DC voltage, load and backup time.
Request a Quote