
Series and Parallel Battery Configurations
Cells in series add voltage; cells in parallel add capacity and current. This is how we build packs from 3.7 V to 72 V and beyond, and how to read names like 13S4P.
How to read 13S4P
S = series
Voltage adds up. 13 Li-ion cells in series give 13 × 3.7 V = 48.1 V nominal.
P = parallel
Capacity and current add up. 4 cells of 3.5 Ah in parallel give 14 Ah.
Energy
Voltage × capacity. 48.1 V × 14 Ah ≈ 673 Wh for a 13S4P pack.
Typical pack configurations
Nominal voltages. Charge and cut-off voltages scale with the series count.
| Li-ion pack | Series | Nominal | Full charge |
|---|---|---|---|
| 3.7 V | 1S | 3.7 V | 4.2 V |
| 7.4 V | 2S | 7.4 V | 8.4 V |
| 11.1 V | 3S | 11.1 V | 12.6 V |
| 14.8 V | 4S | 14.8 V | 16.8 V |
| 18.5 V | 5S | 18.5 V | 21 V |
| 24 V | 7S | 25.9 V | 29.4 V |
| 36 V | 10S | 37 V | 42 V |
| 48 V | 13S | 48.1 V | 54.6 V |
| 60 V | 16S | 59.2 V | 67.2 V |
| 72 V | 20S | 74 V | 84 V |
| LiFePO4 pack | Series | Nominal | Full charge |
|---|---|---|---|
| 12 V | 4S | 12.8 V | 14.6 V |
| 24 V | 8S | 25.6 V | 29.2 V |
| 36 V | 12S | 38.4 V | 43.8 V |
| 48 V | 15S / 16S | 48 / 51.2 V | 54.8 / 58.4 V |
| 60 V | 20S | 64 V | 73 V |
| 72 V | 24S | 76.8 V | 87.6 V |
Work out your layout
Choose the chemistry, then set the series and parallel count. The check line tells you whether the cells can carry your peak current.
- Parallel count also sets the current each cell must carry
- Leave margin below the cell continuous rating
- We confirm the final layout against the datasheet
Illustrative only. We confirm the final layout against the cell datasheet and your peak current.
Frequently asked questions
No. All cells in a pack should be the same model and batch, matched for capacity and internal resistance. Mixed cells age unevenly.
Yes, for any pack with more than one cell in series. The BMS keeps the series groups at the same voltage.
13S Li-ion gives 48.1 V nominal; 15S or 16S LiFePO4 gives 48–51.2 V. Both sit in the 48 V class, so the device voltage window decides.
Yes. Any series count is possible as long as the charger and device match the voltage window.

Need a specific voltage?
Tell us your device voltage window, capacity and peak current. We will propose the series and parallel layout.




















































